VALLA 120EVO

Lifting Capacity 26,400 lb
Total Weight 31,570 lb
Power Source Electric
Dimensions W 6’5″ x H 6’6″ x L 13’4″
Max Horizontal Reach 32 ft
Max Vertical Reach 45 ft

rental-button-120evosales-button
The Valla 120EVO has been designed and built as part of the company’s commitment to renewing and updating the existing models Valla has to offer. The 120EVO is more compact than the previous 12ton models with an overall width of 6.4′ against the previous unit being 6.9′. Its length has reduced to 13.3′ with a total height of 6.5′ making it an excellent mini crane with 26,455 LBS capacity.

Valla has taken the chance to upgrade this model significantly with the main boom now resting in a position that a fixed hook is almost touching the ground. They also offer an internally located winch option, where as before this would be fixed externally onto the boom. The 120EVO uses a hydraulic and sequential boom with almost 46 FT reach and 3,748 LBS, is front wheel drive and has a internal rear steering angle of 85 degrees eliminating the movement of the counterweight when steering and reducing the area required behind the crane when operating in a confined area.

Equipment Specifications:

MOBILE CRANE MODEL 120 EVO
MAX. CAPACITY 26,400 lb
CRANE TOTAL WEIGHT WITH BATTERY (unloaded crane) 31,570 lb
WEIGHT ON REAR WHEEL AXLE (unloaded crane) 21,100 lb
WEIGHT ON FRONT WHEEL AXLE(unloaded crane) 10,470 lb
HEIGHT OF COMPLETELY LIFTED STRAIGHT BOOM 45′ – 5″
HEIGHT OF COMPLETELY LIFTED RETRACTED BOOM 20′ – 2″
HEIGHT OF HOOK FROM GROUND WITH HORIZONTAL BOOM 35″
MAX. EXTENSION OF BOOM (MEASURED FROM HINGING PIN) 42′ – 12″
MIN. EXTENSION OF BOOM (MEASURED FROM HINGING PIN) 15′ – 1″
MAX. GRADE OF COMPLETELY LIFTED BOOM +65°/-10°

120evo-dims

LOAD CHART

Load Chart With Winch

120evo-load-chart-hook

 

EQUIPMENT DETAILS

TRACTION MOTOR:
N.2 electric motor, AC, 80V – 12kW, 96 V, tupe G0C02306 – 2000 rpm, self-ventilated,
controlled by inverter with regenerative braking.
TRACTION CONTROL:
electronic regulation DUAL AC2, 80V – 200A (see handbook enclosed).
ELECTROPUMP CONTROL:
electronic regulation AC2, 80V – 275A (see handbook enclosed).
TRACTION BATTERY:
no. 1 batteries 80V – 800 Ah, weight not less then 3,960 lb.
TRANSMISSION:
differential axle with hydraulic motor’s dircet coupling and double reduction on the wheels.
STEERING:
automotive-type through hydraulic steering DANFOSS type with antishock protection valves and
filter.
BRAKE:
– service: pedal brake with multidisc hydraulic control on front wheels and disc brake on
rear wheels;
– parking: hydraulic control lever;
WHEELS:
o front driving and bearing: No.4 superelastic 250/70-15″. No marking type
o rear idling and steering: No.2 superelastic 250/70-15″. No marking type
BOOM:
5 Elements with fully hydraulic synchronized deployment, sliding on pads
CRANE HYDRAULIC CIRCUIT:
Hydraulic oil tank, 66 US gallon capacity approximately, N.2 electric pumps 80V – 12kW – 2000
RPM with piston pump range of 40 cm³/rev; N.2 drive hydraulic motors variable between 80
cm³/rev to 52 cm³/rev; N.1 electric pump 80V – 12kW – 2200 RPM with a range of gear pump 18
cm³/rev, N 1 electric pump 80V – 2kW – 1600 RPM with a range of gear pump 11+2 cm³/rev;
Distributor 3 elements double effect for the command of the boon telescopic cylinder, the boom
lifting cylinder and hydraulic winch; pressure relief valve calibrated to 240 kg/cm² (3450 PSI),
block valves simple, balancing valve regenerative, exchange valve, heat exchanger, 60μ filter
on the oil return 90μ filter on the pump drive;
TELESCOPIC CYLINDER:
N.1 double effect.
LIFTING CYLINDER:
N.1 double effect.
ADMITTED CONDITIONS OF USE:
Temperature range
– During operation: from 41 °F to 104 °F
– When at a stand-still: max 113 °F
Note: to get the battery max. life and best performance we recommend keeping a temperature
from 59 °F to 95 °F.

OPTIONS & ATTACHMENTS

120EVO JIB

MAX CAPACITY JIB WITH HOOK 6,600 lbs
MAX CAPACITY JIB WINCH 6,600 lbs
TOTAL WEIGHT OF THE ACCESSORY 810 lbs

120evo-jib

 

120evo-load-chart-jib